Original Item: Only One Available. This is a fine condition WWII production Mark 3 U.S. fighting knife, made by the desirable maker, Utica Cutlery Co., and contained in a VERY RARE original 1943 dated M6 leather Scabbard by Service Boots & Leggings Co. (S.B.L. Co.). This company only made this earliest pattern of the scabbard in 1943, and only made 35,000 of them. In contrast, Milwaukee Saddle Co (Milsco) made 140,494, and other contractors a similar number. These scabbards are rare to find in ANY condition.
This knife is later production, indicated by the maker information being stamped onto the crossguard: U S / M-3 / UTICA. Utica Cutlery Co. was one of several manufacturers of the M3 knife, and also made M1942 Bayonets, M4 bayonets, and other edged weapons during the war. This example is the third and last version of the knife. The first and second had markings on the blade, with the first also being dated 1943. The later version moved the markings to the cross guard. The 6 5/8 inch spear point blade is in very good used condition, with a good amount of the original finish, except towards the tip, which is more worn. The blade is still quite sharp. It does not have any major issues or damage, though there has been post production sharpening, particularly on the false edge. The handle and stacked leather grip are in great shape, with a lovely color, no cracking, and shows very little use. There are no major cracks, and the leather is still soft. The bottom of the pommel shows the U.S. "Flaming Bomb" proof mark, next to the "sunburst" pattern peened tang.
The original scabbard is marked, U.S. M6 / S.B.L. CO / 1943, and is in good condition, with all components intact. It does show quite a bit of wear in the leather, and the finish is missing from most of the metal components.. It has a lovely aged leather look, and is still quite soft. This is the earliest model of the original scabbard designed for this knife, which was then replaced with the Fiberglass M8/M8A1 scabbards, which were also used with the M4 bayonet. The maker Service Boots & Leggings Co. made very few scabbards during the war, making this a quite rare example.
A very nice example of a WWII issue M3 knife from a desirable maker, in a very rare early leather scabbard, ready to add to your WWII edged weapon collection!
History of the M3 Fighting Knife
The M3 fighting knife or M3 trench knife was an American military combat knife first issued in March 1943. The M3 was originally designated for issue to soldiers not otherwise equipped with a bayonet. However, it was particularly designed for use by elite or 'shock' forces in need of a close-combat knife such as airborne troops and Army Rangers, and these units received priority for the M3 at the start of production. As more M3 knives became available in 1943 and 1944, the knife was issued to other soldiers such as Army Air Corps crewmen and soldiers not otherwise equipped with a bayonet, including soldiers issued the M1 Carbine or submachine gun.
The M3 was manufactured by a number of U.S. knife and cutlery manufacturers during the war. Manufacturers known to have made the M3 under wartime contract include the Aerial Cutlery Co., W. R. Case & Sons Cutlery Co., Imperial Knife Co., PAL Cutlery Co., Camillus Cutlery Co., Robeson (ShurEdge) Cutlery Co., Kinfolks Inc., Utica Cutlery Co., and H. Boker & Co.
The M3 was developed as a replacement for the World War I-era U.S. Mark I trench knife, primarily to conserve strategic metal resources. The prototype for what would become the M3 was evaluated in December 1942 by the civilian board of directors of the Smaller War Plants Corporation Board (SWPC) against another competing design, the US Marine Corps' 1219C2 fighting utility knife. However, while the specified priority steel supplies for both knives were available, the M3's lower production cost compared to that of the 1219C2 convinced the SWPC board of directors to approve the M3 prototype for quantity production.
Though the M3 had competed with the USMC 1219C2 for approval by the Army, the M3, unlike the Marine Corps knife, was not a dual-purpose weapon designed for both close combat (fighting knife) and general use (utility knife). As the U.S. Catalog of Standard Ordnance Items of 1943 clearly explained:
The Trench Knife M3 has been developed to fill the need in modern warfare for hand-to-hand fighting. While designated for issue to soldiers not armed with the bayonet, it was especially designed for such shock units as parachute troops and rangers.
The M3 was first issued to U.S. Army soldiers in March 1943, with the first knives going to elite units such as airborne troops and the U.S. Army Rangers. Despite ordnance descriptions of the knife as being designed for hand-to-hand warfare, the M3 did not receive universal praise as a close-quarters fighting knife upon issue to combat units. While the knife itself was generally well-made and balanced (some paratroopers and rangers mastered the art of using the M3 as a throwing knife), the long narrow dagger-like steel blade, designed to economize on priority steel requirements, was best used as a thrusting or stabbing weapon, and performed less well when used for slashing strokes. Reports of blade failures on M3s in service increased as soldiers began to use their trench knives for ordinary utility tasks such as opening ammo crates and food ration tins, a role for which the M3 had not been designed. Some soldiers also found the M3's cutting edge to be difficult to maintain in the field. As issued, the blade's secondary or false edge was intentionally sharpened and beveled for only a portion of its length, leaving an unsharpened spine on the top of the blade in an effort to stiffen the relatively narrow blade. This limited the usefulness of the M3 when employed for backhand slashing strokes.
The M3 replaced the OSS dagger in service in 1944.
After U.S. Army ordnance began developing a proprietary bayonet for use on the M1 carbine, it was realized that the new carbine bayonet, which already incorporated the M3 blade design and leather-wrap grip, could also replace the M3 in service in a secondary role as a fighting knife. The carbine bayonet, now designated the Bayonet, U.S. M4, was added to the Company Table of Organization in June 1944, and the M3 was declared to be a limited standard ordnance item, with supplies to be issued until exhausted. Nevertheless the final M3 production run did not take place until August 1944, by which time 2,590,247 M3 trench knives had been produced.
At termination of production in August 1944, the M3 trench knife had one of the shortest production and service records of any U.S. combat knife. However, the M3's blade design continued in U.S. military service in the form of the U.S. M4, M5, M6, and M7 bayonets.
